GET STARTED

CONGRATULATIONS ON YOUR NEW TILT FIVE GAMING SYSTEM!

Let’s Get You Up And Playing!
What's included?

Included in your box, you will find:

1. Tilt Five® Gameboard

2. Tilt Five® Glasses

3. Tilt Five® Wand

4. USB-C cable

5. Type C to Type A USB adapter

6. Lens cleaning cloth

You'll Also Need:
  • Windows 10* PC with USB 3 port
How to find a USB 3 port

*Android support and set-up instructions coming soon

*Tilt Five does not currently support MacOS

  • Two (AA) batteries

Tilt Five board
Tilt Five glasses
Tilt Five wand
Tilt Five wire
Tilt Five laptop
Install the software

Please download the latest Tilt Five driver installer to get your Tilt Five® system up and running!

  1. Download the driver installer with the button below:
  1. Run the Tilt Five Driver Setup .exe to launch the setup process
  2. Allow Tilt Five Driver Setup .exe to make changes, Select ‘Yes’
  3. Select ‘Next’ to go through Install wizard
  4. All required components are selected by default
  5. Once your installation is complete, Select ‘Finish’

*Tilt Five does not currently support MacOS

Tilt Five glasses and wand
Tilt Five board
Tilt Five wand
Tilt Five laptop
01
Unpack the Kit

Remove all the components from the box.

Remove protective film from your Tilt Five® Glasses and Wand.

Remove the Gameboard from the plastic sleeve. Then remove the thin protective film from the retroreflective surface of the Gameboard prior to use.

Tilt Five glasses and wand
Tilt Five board
Tilt Five glasses
Tilt Five wand
Tilt Five laptop
02
Set up the Glasses

Connect your Glasses to a supported Windows 10 PC using the Tilt Five® USB-C cable and included USB-C to USB-A adapter if needed.

You must use a USB 3.0 port on the PC.

To ensure your cable is plugged in properly to your Glasses, there are guides located at the top and bottom of the cable to direct it.

Push on the angled or curved end of the USB-C cable toward the USB-C port on the Glasses until it is flush. You’ll feel it firmly click into place.

You will see the Tilt Five® icon in your task bar, click this to open the Tilt Five® Control Panel.

If the Glasses show as “Ready”  they are connected your computer standing by ready to go.

Troubleshooting

If you find your Glasses are unable to connect with your computer, ensure that both ends of the USB cable are inserted properly into your devices. Ensure that the connection is snug.

If you get “Unsupported USB Port” or other USB error messages, please try the following:

  • Reverse the USB-C cable to get a better connection. Unplug the cable from the Windows 10 PC or USB-C to A adapter, rotate it 180 degrees, and plug it back in.
  • Try a different USB port on your computer. Some USB 3.0 ports may work better than others for providing consistent power and data connections to the Glasses. You may need to use the included USB-C to USB-A adapter. 

Still having issues?

Contact our customer service department for expert support using the HELP chat on our website or support@tiltfive.com.

Tilt Five glasses and wand
Tilt Five board
Tilt Five glasses
Tilt Five wand
Tilt Five laptop
03
Set up the wand

Insert 2 AA batteries into your Wand.

Press the Tilt Five® Button (center button immediately below the 1&2 button). You will see a blinking blue LED light indicating the Wand is successfully paired to your glasses.

Once you turn on your Wand, if prompted by the Control Panel on your computer, please update the Wand as required.

Troubleshooting

Your wand comes pre-paired with your glasses in the factory. But, if for some reason, the pair was broken, follow the instructions below:

  1. Open the Tilt Five® Control Panel on your PC
  2. Click on "Glasses" in the Tilt Five control panel
  3. Click on the orange circle and select the “Pair Wand” troubleshooting guide
  4. Follow the troubleshooting directions in the control panel

Your wand will light up blue to indicate it has successfully paired.

Still having issues?

Contact our customer service department for expert support using the HELP chat on our website or support@tiltfive.com.

Tilt Five glasses and wand
Tilt Five board
Tilt Five glasses
Tilt Five wand
Tilt Five laptop
04
PLAY Some Games

Open the Marbles demo in the Tilt Five® folder or type Marbles in your Windows search bar.

Be sure to look at the Tilt Five® Gameboard with the Tilt Five® Glasses to activate the magic!

Want more games? Go to the Games Catalog to download Tilt Five compatible games from Steam, Epic Games Store, Itch.io, GOG, etc.

Happy gaming!

Tilt Five glasses and wand
Tilt Five board
Tilt Five glasses
Tilt Five wand
Tilt Five laptop
05

FAQ.

Still looking for answers? Check some of our most Frequently Asked Questions.

If you are a developer, check out our Developer FAQs.

Start Gaming Today

Check out our growing catalogue of Tilt Five games!

Have more questions?

Our team is here to help.

Thank you for your message! We will get back to you shortly.
Oops! Something went wrong while submitting the form.
How to find a usb 3 port

When looking at the physical ports on your computer, a USB 3.0 (or faster) port, may be marked by any of the following:  

  • A color on the USB port itself, blue for 3.0, green/teal for 3.1, or red for 3.2 
  • "SS" (Super Speed) or "3.0" markings next to the port
  • The USB SuperSpeed Trident logo

Many computer manufacturers do not clearly mark USB port versions. Unsure if your computer has USB 3.0 ports? Use the Windows Device Manager to check:

  1. In the search box on the taskbar, type Device Manager and select open
  2. Locate Universal Serial Bus Controllers at the bottom of the list
  3. Expand the dropdown and if you see USB 3.0, XHCI, or Super Speed listed, you have USB 3.0 ports.
X